BF1000 Silicone Foam Strip

CB Frost are an established UK manufacturer of sponge, foam and rubber strip.

The materials we covert from sheeting to strip are either closed cell, open cell, semi-closed cell sponge, foam or solid rubbers.

CB Frost are a UK preferred convertor of the BISCO® range of silicone-based foams and have a relationship with Rogers Corporation extending over 30 years.

BF1000 is an extra-soft Silicone Foam, offering the lightness of a foam, with the enhanced sealing capabilities of traditional sponges. It has a low compression value, which means the material will return to 99% of its original thickness after being under compression and provides protection against dust, moisture and water ingress on a wide range of indoor and outdoor applications.

BF1000 Silicone Foam is a fire safe material and meets the requirements of EN45545-2, BS6853 Cat 1A, UL94 V-0 and HF-1.

Adhesive Backed BF1000 Silicone Foam Strip

CB Frost can apply a pressure sensitive adhesive to either one or both faces of BF1000 Silicone Foam. We stock a wide range of synthetic and acrylic tapes, our adhesive tapes come with an easy peel release liner which you simply remove to expose the adhesive. This face is then placed on to the substrate and firmly pressed to obtain the bond.

Lead-times

Our lead-time to supply Plain or Adhesive BF1000 Silicone Foam strip is 7-10 days, however CB Frost are flexible and work with our customers to ensure we meet their expectations.

BF1000 Silicone Foam Strip Capabilities

CB Frost are the UK’s number one supplier of BF1000 Silicone Foam strip and produce vast quantities of strip every year. We cater for small, medium and large runs. Our slitting capabilities allow us to offer our customers a range of widths and can manufacture strip from 3mm wide.

We supply BF1000 Silicone Foam in coils. The length of each coil is based on a standard roll length; in this case 6.1mtrs. However, we do have the facility to supply longer or smaller coil lengths if required.

Coils are packed securely into suitable packaging and labelled in accordance with our customer requirements.

BF1000 Silicone Foam strip is manufactured at our site in Nechells, Birmingham based in the West Midlands.

Standard colours are white and grey and we hold in stock following thicknesses.

 

BF1000 Silicone Foam thicknesses

1.6mm, 2.36mm, 3.18mm, 4.76mm, 6.35mm, 9.53mm, 12.7mm, 15.9mm, 19.1mm and 25.4mm  

Free of charge BF1000 Silicone Foam Strip Samples

CB Frost will supply free of charge a small sample of BF1000 Silicone Foam Strip to your required size for testing before committing to an order.

Overview:

  • Plain, Single or Double Sided Adhesive Backed Strip

  • Cut to length

  • EN45545-2 approved

  • BS6853 Cat 1A approved

  • UL94 V-0 and HF-1

  • IP65, IP66, IP68 approved in application

  • FDA approved (grey only) 21 CR 177.2600

We have the capabilities to convert BF1000 Silicone Foam Strip into various shapes/strips/tapes etc, please click on the below for further details or visit our products section within the website.

transparent

BF1000 Silicone Foam Gaskets

View Product

transparent

BF1000 Silicone Foam Washers

View Product

transparent

BF1000 Silicone Foam Sheeting

View Product

BF1000 Silicone Foam Strip SAMPLE REQUEST

Please enter your name.
Please enter a subject.
Please enter a valid phone number.
Please enter a message.

Our Partners

Dependable on-time
delivery
Full lot traceability on
raw material
Rapid lead times on tooling
and products
Manufacturing services from 1-off
to mass production
CB Frost Logo

Office Hours

Monday to Thursday
8.00am to 4.35pm
Friday - 8.00am to 1.00pm

Get in touch

Unit C1, Matrix Point, Mainstream Way, Nechells, Birmingham: UK: B7 4SN