PVC sponge is a low density Polyvinyl Chloride closed cell sponge, 100-120kg/m3 available in two forms; slow or fast recovery. Named after how quickly the material recovers after compression. Ideal applications for PVC closed cell sponge include saddles, expansion joints, desk pads and as insulation on panels.
PVC sponge exhibit advantages including a high resistance to ozone and solvents; it also works well for acoustics and sound insulation.
At CB Frost, we can produce PVC sponge gaskets in a wide variety of different colours, depending on your requirements. All sponge gaskets can be cut to size and shape in-house from our supply of roll stock material. PVC sponge is available in a range of thicknesses from 3mm to 20mm.
Capabilities
Our PVC products come in a wide range of shapes and sizes, please do not hesitate to contact our Sales team on 0121 773 8494 if you need advice on the most suitable grade for your application.
PVC Sponge Gaskets
At CB Frost, we can produce PVC sponge gaskets that can be cut to size and shape in-house from our supply of roll stock material. Our PVC sponge gaskets can be supplied in any shapes, ranging from simple shapes such as squares, rectangles or circles, or more complex designs featuring holes and cut-outs, radius, and angled corners.
For gaskets with a thickness of between 3mm and 15mm, we manufacture them using our overhead or swing arm presses. For PVC sponge gaskets that are more than 15mm in thickness, we instead water jet cut them, ensuring that all edges of the gasket are flat and not concaved, giving the required fit.
At CB Frost, we can cater for all requirements, from custom one offs to full volume production. For full volume production of PVC sponge gaskets, we can supply them in mass, kiss cut on rolls – dependent on the size and shape of your gasket requirement.
We can supply PVC sponge gaskets either plain or adhesive backed and have a range of adhesive tapes which can be applied to PVC sponge to suit your requirements.
PVC Sponge Washers
At CB Frost, we can produce PVC sponge washers in almost any size from our stock roll material; using our in-house manufacturing facilities.
Washers with a thickness of between 3mm and 15mm can be manufactured using either our swing arm or overhead presses. For PVC sponge washers that are more than 15mm in thickness, we instead water jet cut them, ensuring that all edges of the gasket are flat and not concaved, giving the required fit.
Whether you require a custom one-off washer or need a large volume of PVC sponge washers in a quick turnaround time, CB Frost can cater for all production requirements. For large volume production, we can supply washers as either individually cut, or kiss-cut and provided on a roll – depending on your specific requirements.
We can supply PVC sponge washers either plain or adhesive backed and have a range of adhesive tapes which can be applied to PVC sponge to suit your requirements.
PVC Sponge Strip
At CB Frost, all PVC sponge strip is cut in house from roll stock material.
We can cut strips to a minimum width of 4mm to suit your specific width requirements. All strips can be supplied in short or long lengths.
We can supply PVC sponge strip either plain or adhesive backed and have a range of adhesive tapes which can be applied to PVC sponge to suit your requirements.
PVC Sponge Sheeting
At CB Frost, we can supply PVC sponge sheeting in a range of thicknesses from 3mm to 20mm.
Depending on your requirements, we supply PVC sponge sheeting in either sheet or roll form. Sheets and rolls range from 2m long by 1m wide to 10m long by 1m wide.
We can supply PVC sponge sheeting either plain or adhesive backed and have a range of adhesive tapes which can be applied to PVC sponge to suit your requirements.
Want more information on our range of PVC sponge products?
Use the links below to find out more about our different PVC sponge products.
For more information or advice
call us today on +44 (0) 121 773 8494
The History Of PVC
A military beginning
The first patents for PVC were founded in Britain and Germany in 1912. Although it was not until World War II that PVC became popular as a choice of material. The water resistance of PVC was shown to be an important property with early products being used predominately in marine applications.
After the war, scientists began to work on making PVC lighter which led to the creation of PVC foamboard and sponge.
To learn more about the advantages of using PVC Sponge material for your product or for further advice, you can call our knowledgeable and experienced team on 0121 773 8494.
PVC SPONGE SAMPLE REQUEST
Our Partners
Dependable on-time
delivery
Full lot traceability on
raw material
Rapid lead times on tooling
and products
Manufacturing services from 1-off
to mass production
Capabilities