Sections

Latest News

News 11 Nov 2026

Thermal Management and Sealing in EV Battery Packs - Silicone Foam

The electric vehicle (EV) market is accelerating at a rapid pace as governments around the world introduce strict regulations and...

News 12 Oct 2026

Why HT800 Strips Are a Great Choice for Electrical Enclosure Seals

Exterior electrical enclosures face a constant battle against the elements, requiring robust sealing solutions to maintain their mandatory IP ratings....

Key Uses and Advantages of EPDM Rubber

Uncategorised

October 19, 2021

As experts in rubber, sponge and plastic materials, and their conversion into products for applications in practically all major industries, CB Frost are your point of contact for information on a wide range of materials. We are here to help you make the right choice, picking the material with the...

As experts in rubber, sponge and plastic materials, and their conversion into products for applications in practically all major industries, CB Frost are your point of contact for information on a wide range of materials. We are here to help you make the right choice, picking the material with the properties and strengths to fit your needs. As well as stocking a range of highly specialised materials for certain industries, we also supply an extensive choice of all-round rubber, sponge and foam materials. EPDM rubber is just one of those all-rounders.

tape/strip

What is EPDM?

EPDM Rubber is a synthetic solid rubber made up of ethylene, propylene, and diene monomers. The molecular structure of EPDM has a single bond, making it an extremely elastic, durable material with strong resistance properties.

Some of the key properties of EPDM include:

A wide temperature range – it resists temperatures of between -30℃ and +80℃, depending on the grade (-40℃ and +100℃ for LSLT EPDM Rubber).

Weather resistance – it resists ozone and UV rays.

Steam resistance – it is extremely water resistant. This combined with temperature resistance means that it is resistant to steam.

Low electrical conductivity – EPDM is a good insulator against electricity (specific grades)

Tensile strength – it is tear and abrasion resistant, with a good compression set.

Fire resistant – Fire retardant grades are available for applications where this is necessary

Resistance to chemicals – it shows a good resistance to water-based chemicals and vegetable-based hydraulic oils, as well as dilute acids, ketones and alkalis.

With these combined advantages, EPDM is widely used as a lower cost polymer, well suited for use in many different applications. With its temperature resistance and weathering properties, it is well suited for outdoor applications, even in sub-zero conditions and when it comes into contact with very cold materials.

extrusions

Let’s look at some of the common uses of EPDM Rubber:

Construction

As an excellent insulator, combined with its weather and waterproof properties, EPDM is commonly used in construction. For many years, it has been used as a major insulating material roofing, particularly flat roofing, however, it is also widely used as a sealant for applications such as door seals, expansion joints, water tanks and pools.

Industrial

As with construction applications, EPDM’s insulating, water and weatherproofing properties, combined with its tensile strength and flexibility, make it a well-suited material for a range of industrial uses. EPDM is commonly used for gaskets, grommets, belts, hoses and O-rings, and for insulators and connectors for electrical wires and cables. 

HVAC

EPDM is commonly used in gaskets, seals, tubing, grommets and wide range of other applications in the HVAC industry.

Automotive

Automotive applications of EPDM are very common, as it is a highly flexible material, with good resistance to weathering, high and low temperatures, and hydraulic oils. EPDM is used to make a number of different automotive products, including seals, sealant, brake systems, wire and cable systems, and vehicle weather stripping. It may also be blended or vulcanised with other materials for car rub strips and bumpers.

EPDM moulding

Our EPDM Rubber Manufacturing Capabilities

Talk to us today to discuss your EPDM needs. Our experts will help you to choose the right grade of material to suit your application.

As specialists in the conversion of EPDM, we produce and supply an extensive range of products, including:

  • Gaskets
  • Strip/tape
  • Washers
  • Sheeting
  • Fabrications
  • Extrusions
  • Moulding

rubber moulding

Whether you are looking for prototype, one-off or regular large scale production runs, our team are here to help you. Call us on 0121 773 8494.

Keep up to date with the
latest CB Frost & Co news

01
03
CB Frost Exhibit for the first time in 2021 – RSN Rail Industry Show, Derby UK
CB Frost Exhibit for the first time in 2021 – RSN Rail Industry Show, Derby UK

It was an exciting week for CB Frost last week as we exhibited in the UK for the first time since 2010. On the 30th September, we were at Derby Arena for RSN 2021, displaying our full range of materials, as well as presenting our extensive manufacturing capabilities. Only the second live indoor rail show […]

Launching the New Lightweight Rail Material
Launching the New Lightweight Rail Material

  As a company, we always strive to provide an ideal solution for customers in all sectors and continually work to develop new products. For over 30 years we have supplied a wide range of materials and finished parts for the rail industry, with our technical knowledge, excellent customer service, attention to detail and extensive […]

90 Years of Neoprene Rubber
90 Years of Neoprene Rubber

    At CB Frost, we supply a massive catalogue of rubber materials to be used across practically any application and we are continually looking to add to our material range in order to manufacture and supply the best possible products for our customers. However, as well as looking to innovate, we are also committed […]

CB Frost Celebrates 100 Years in Business
CB Frost Celebrates 100 Years in Business

In March 2021, we will celebrate our 100 years anniversary. From small beginnings in 1921, to our relocation and expansion last year, we are extremely proud of our achievements over the last century.  Whilst so much has changed since 1921, we have always strived to stick to the original CB Frost ethos of ‘quality without […]

CB Frost and The New Tube For London
CB Frost and The New Tube For London

With London’s population growing rapidly, over the next few decades, trains, stations and tracks are being modernised across the London Underground Network to meet demands. The New Tube will first be introduced for the Piccadilly line, with the Bakerloo, Central and Waterloo, and City lines to follow. To provide a more reliable service and meet […]

A Guide to Rubber Moulding at CB Frost
A Guide to Rubber Moulding at CB Frost

With our considerable expertise in rubber moulding, we can supply moulded rubber products in most rubber materials to suit any application. Whether you need a prototype, small batches, large-scale production or long running schedules, we can accommodate your requirements.   Based in Birmingham, we supply moulded components to customers throughout the UK as well as building […]

CB Frost & Co sees Seven-Figure Management Buyout
CB Frost & Co sees Seven-Figure Management Buyout

In a commitment to future growth and expansion into new sectors, we have recently undergone a seven-figure management buyout, led by existing directors Paul Kennedy and Mark Jones. The new company structure will focus on the expansion into new sectors and further investment in the plant and its machinery. Director David Dunn is set to […]

BS6853 Fire Regulations: Ensuring the Safety of Passenger Carrying Railway Vehicles
BS6853 Fire Regulations: Ensuring the Safety of Passenger Carrying Railway Vehicles

With railway lines running with continuous streams of passengers every day, often against adverse weather conditions or in enclosed spaces, it is so crucial for the vehicles used to be fire safety compliant. New or existing railway vehicles should constantly develop and upgrade to reduce the risks of damage caused by fire. The British Standard […]

Your Questions about Injection Moulding Answered | Bespoke Rubber Mouldings
Your Questions about Injection Moulding Answered | Bespoke Rubber Mouldings

As specialists in the manufacture of rubber components, we have many years of experience in producing and supplying bespoke rubber mouldings for use in a vast range of different industries. With our in-house capability, we can choose from a number of different process in order to achieve the ideal results to suit customer requirements, including […]