Armaflex® Rail SD & SD-C sponge is the world’s first flexible closed cell insulation to meet EN45545-2 fire protection requirements.
All Armaflex rail products conform to the
European fire protection standard EN45545-2 and are the first to achieve Levels
HL2 and 3 R1. It is the leading and most innovative closed cell thermal insulation
available to the railway industry worldwide and comes complete with a built-in
vapour barrier reducing the risk of corrosion under insulation (CUI). Armaflex® Rail SD
& SD-C has been developed to produce extremely low smoke density and reduce the
risk of mold and mildew contributing to an improved indoor air quality
Armaflex® Rail SD-C
Available in tubes, plain and self-adhesive sheets, and self-adhesive tapes
Extremely low smoke density and superior fire behaviour
Built in Microban® antimicrobial protection reduces mold and bacteria growth
Complies with most international railways standards for insulation materials such as EN45545-HL2, R1, NFPA 130, DIN 5510-2, GOST 12.1.044-89 and United Nations ECE R-118 p. 6-8.
Armaflex® Rail SD-C
Available in pre-covered tubes, pre-covered self-adhesive sheets, and self-adhesive tapes
Built in Microban® antimicrobial protection reduces mold and bacteria growth
Excellent mechanical protection and high degree of stability under exposure to ultraviolet light
Wash down waterproof and easy to clean
Factory applied reinforced coating with silver finish for hygiene area requirements
Complies with international railway standard for insulation material EN45545-HL3, R1
Rail SD & SD-C Gaskets is used in various industries such as
HVAC
Refrigeration Air Ducts and Pipes (Condensation Protection)
Lavatory Modules
Floors
At CB Frost we can supply as follows:
As standard, Armaflex® Rail SD & SD-C sponge is available in blue.
CB Frost manufacture all sizes of Armaflex® Rail SD & SD-C sponge gaskets using roll stock material
Armaflex® Rail SD & SD-C sponge gaskets can be supplied in any shape from simple rectangular, square, or circular designs to more complex shapes with holes, cut-outs, radius, and angled corners
Armaflex® Rail SD & SD-C sponge gaskets above 9mm thick would be water jet cut ensuring all edges of the gasket are flat and not concaved to give a correct fit
We can supply all Armaflex® Rail SD sponge gaskets plain or with a single sided self-adhesive backing
We can only supply Armaflex® Rail SD-C sponge gaskets with a single sided self-adhesive backing
We cater for custom one offs to full volume productions
ArmaFlex Rail SD Continuous sheets (Rolls)
Code | Thickness (mm) | Roll Length (m) | m2/carton |
RA-03-99/E | 3.0 | 30 | 30 |
RA-06-99/E | 6.0 | 15 | 15 |
RA-09-99/E | 9.0 | 10 | 10 |
RA-13-99/E | 13.0 | 8 | 8 |
RA-19-99/E | 19.0 | 5 | 5 |
Length tolerance for tubes | ± 1.5% |
Thickness Tolerance | 3 – 6mm ± 1.0mm 9 – 19mm ± 1.5mm |
Reaction to Fire | Hazard Level 2, R1 according to EN45545-2 3mm sheets: HL3, R1 |
For more information or advice
call us today on +44 (0) 121 773 8494
We have the capabilities to convert Rail SD & SD-C Gaskets into various shapes/strips/tapes etc, please click on the below for further details or visit our products section within the website.
Rail SD & SD-C Gaskets SAMPLE REQUEST
Our Partners
Dependable on-time
delivery
Full lot traceability on
raw material
Rapid lead times on tooling
and products
Manufacturing services from 1-off
to mass production
Capabilities