CBF Sil-V0 Silicone Sponge Strip

CB Frost are an established UK manufacturer of sponge, foam and rubber strip.

The materials we covert from sheeting to strip are either closed cell, open cell, semi-closed cell sponge, foam or solid rubbers. Our lightweight CBF Sil-V0 silicone sponge is fully closed cell and has been formulated to improve fire smoke and safety for the rail industry. CB Frost Sil-V0 is compliant with the European fire safety standard EN45545-2 for rail vehicles.

CBF Sil-V0 Silicone Sponge has good resistance to UV, Ozone, general weathering and can be used as a gap or anti rattle filler strip to protect against the ingress of dust and moisture.

Rolls are 5mtrs long x 1mtr wide and grey in colour.

Our strip or tape is supplied in coils. The length of each coil is based on a standard roll length; in this case 5mtrs. However, we do have the facility to cut to smaller lengths if required.

Coils are packed securely into suitable packaging and labelled in accordance with our customer requirements.

Adhesive Backed CBF Sil-V0 Silicone Sponge Strip

CB Frost can apply a pressure sensitive adhesive to either one or both faces of CBF Sil-V0 Silicone Sponge. We stock a wide range of synthetic and acrylic tapes, our adhesive tapes come with an easy peel release liner which you simply remove to expose the adhesive. This face is then placed on to the substrate and firmly pressed to obtain the bond.


Our lead-time to supply Plain or Adhesive Backed CBF Sil-V0 Silicone Sponge strip is 7-10 days, however CB Frost are flexible and work with our customers to ensure we meet their expectations.

CBF Sil-V0 Silicone Sponge Strip Capabilities

CB Frost produce large quantities of CBF Sil-V0 Silicone Sponge strip every year and cater for small, medium and large runs. Our slitting capabilities allow us to offer our customers a range of widths and can manufacture strip 4mm wide up to 1mtr wide in most thicknesses.

CBF Sil-V0 Silicone Sponge strips are manufactured at our site in Nechells, Birmingham based in the West Midlands.

Free of charge CBF Sil-V0 Silicone Sponge Strip Samples

CB Frost will supply free of charge a small sample of CBF Sil-V0 Silicone Sponge strip to your required size for testing before committing to an order.


  • Plain, Single or Double Sided Adhesive Backed Strip

  • Good UV and Ozone properties

  • EN45545-2 approved

  • BS6853 Cat 1A approved

  • High/low temperature resistance

  • UL94 V-0

  • Fully closed cell

  • Can be extruded into shaped profiles

We have the capabilities to convert CBF Sil-V0 Silicone Sponge Strip into various shapes/strips/tapes etc, please click on the below for further details or visit our products section within the website.


CBF Sil-V0 Silicone Sponge Gaskets

View Product


CBF Sil-V0 Silicone Sponge Washers

View Product


CBF Sil-V0 Silicone Sponge Sheeting

View Product

CBF Sil-V0 Silicone Sponge Strip SAMPLE REQUEST

Please enter your name.
Please enter a subject.
Please enter a valid phone number.
Please enter a message.

Our Partners

Dependable on-time
Full lot traceability on
raw material
Rapid lead times on tooling
and products
Manufacturing services from 1-off
to mass production
CB Frost Logo

Office Hours

Monday to Thursday
8.00am to 4.35pm
Friday - 8.00am to 1.00pm

Get in touch

Unit C1, Matrix Point, Mainstream Way, Nechells, Birmingham: UK: B7 4SN