HT High Temperature Armaflex Strip

CB Frost are an established UK manufacturer of sponge, foam and rubber strip.

The materials we covert from sheeting to strip are either closed cell, open cell, semi-closed cell sponge, foam or solid rubbers.

HT Armaflex industrial is a flexible, high density and mechanically robust, closed cell thermal insulation foam.

HT Armaflex is an EPDM based insulation foam that can be used at higher temperatures for industrial applications.

Its closed cell structure acts as an effective vapour barrier and its low thermal conductivity and high degree temperature range (150 C) makes the material suitable for use in range of applications.

For more information on HT High Temperature Armaflex Strip
please visit the materials section of our website or click here. 

Adhesive backed HT High Temperature Armaflex Strip

CB Frost can apply a pressure sensitive adhesive to either one or both faces of CBF Sil-V0 silicone sponge. We stock a wide range of synthetic and acrylic tapes, our adhesive tapes come with an easy peel release liner which you simply remove to expose the adhesive. This face is then placed on to the substrate and firmly pressed to obtain the bond.

Lead-times

Our lead-time to supply plain CBF Sil-V0 silicone sponge strip is 10-14 working days. Adhesive backed CBF Sil-V0 silicone sponge strip is 2-3 weeks, however CB Frost are flexible and work with our customers to ensure we meet their expectations.

HT EPDM Armaflex foam strip Capabilities

We produce large quantities of HT EPDM foam strip every year and cater for small, medium and large runs. Our slitting capabilities allow us to offer our customers a range of widths and can manufacture strip from 5mm wide.

We supply HT EPDM foam strip in coils. The length of each coil is based on the standard roll length, which is usually 10mtrs. We also have the facility to supply shorter lengths if required.

Coils are packed securely into suitable packaging and labelled in accordance with our customer requirements.

HT EPDM foam strip is manufactured at our site in Nechells, Birmingham based in the West Midlands.

HT EPDM Armaflex thicknesses

10mm, 13mm, 19mm, 25mm

Free of charge HT EPDM Armaflex foam strip samples

CB Frost will supply free of charge a small sample of HT EPDM foam strip to your required size for testing before committing to an order.

Overview:

  • Plain or adhesive backed strip

  • Double sided adhesive backed strip

  • Cut to length

  • UV resistant and able to withstand typical weathering effects

  • Built-in water vapour barrier reduces risk of corrosion under insulation (CUI)

  • Retains its physical characteristics throughout service life

  • High degree of stability for a wide temperature range

We have the capabilities to convert HT High Temperature Armaflex Strip into various shapes/strips/tapes etc, please click on the below for further details or visit our products section within the website.

transparent

HT High Temperature Armaflex Gasket

View Product

transparent

HT High Temperature Armaflex Washers

View Product

transparent

HT High Temperature Armaflex Sheeting

View Product

HT High Temperature Armaflex Strip SAMPLE REQUEST

Please enter your name.
Please enter a subject.
Please enter a valid phone number.
Please enter a message.

Our Partners

Dependable on-time
delivery
Full lot traceability on
raw material
Rapid lead times on tooling
and products
Manufacturing services from 1-off
to mass production